/
Ross Crossover Switcher - How to set to External Sync
Ross Crossover Switcher - How to set to External Sync
- Susanne Kraft
Owned by Susanne Kraft
Apr 22, 2021
Click the Menu Button Then REF or #3 |
|
Click NEXT button |
|
Turn the knob to change to Ext RefSrc |
|
Ext RefSrc Then PUSH the knob to set the setting |
|
| Push again to Confirm |
|
Related content
Ross Carbonite - How to Set Sync for The Tower Cam
Ross Carbonite - How to Set Sync for The Tower Cam
More like this
CMB 4.130 - Ross Switcher not displaying Live Assist
CMB 4.130 - Ross Switcher not displaying Live Assist
More like this
Pro Tools - How to Setup For a Atmos Mix Session
Pro Tools - How to Setup For a Atmos Mix Session
More like this
ProTools - How to Setup the Mixing Stations and Test Calibration Pink Noise Session
ProTools - How to Setup the Mixing Stations and Test Calibration Pink Noise Session
More like this
Crestron Room / Door Scheduler Touch Panel - How to Reset If It Is Not Showing the Correct Schedule
Crestron Room / Door Scheduler Touch Panel - How to Reset If It Is Not Showing the Correct Schedule
More like this
CMB 4.130 - TV Production Control Room
CMB 4.130 - TV Production Control Room
More like this