/
Ross Crossover Switcher - How to Fix a Sync Line in Remote Camera Input or Frame Sync the Input
Ross Crossover Switcher - How to Fix a Sync Line in Remote Camera Input or Frame Sync the Input
- Susanne Kraft
Owned by Susanne Kraft
Last updated: Apr 22, 2021
Click the Menu Button Then REF or #3 |
|
| Click NEXT button |
|
Push the knob under Fcfs1 |
|
Then Turn the knob under Off Fcfs1 |
|
Till you get to this setting Input 9 Full |
|
Press the 1st knob to enter the setting change |
|
Press Confirm to Confirm the change |
|
Related content
Ross Crossover Switcher - How to set to External Sync
Ross Crossover Switcher - How to set to External Sync
More like this
Ross Crossover Switcher - How to Check and Set the Crosspoints and Set Correctly
Ross Crossover Switcher - How to Check and Set the Crosspoints and Set Correctly
More like this
Ross Crossover Switcher - N Pass setup
Ross Crossover Switcher - N Pass setup
More like this
Ross Crossover Switcher - How to Reset the Switcher
Ross Crossover Switcher - How to Reset the Switcher
More like this
Ross - Crossover Switcher - How to set the Key Transition Durations Cuts (0 frames) or Dissolves
Ross - Crossover Switcher - How to set the Key Transition Durations Cuts (0 frames) or Dissolves
More like this
Ross - Crossover Switcher - How to set the Key Transition Durations Cuts
Ross - Crossover Switcher - How to set the Key Transition Durations Cuts
More like this