/
DMC 4.206 For Lab Manager: Setting Default Routing for TVs

DMC 4.206 For Lab Manager: Setting Default Routing for TVs

Owned by David Cox
Last updated: Sep 23, 2021

This document describes how the Lab Manager can adjust the default sources shown daily on the TVs in the DMC 4.206 ADV Collaboration Room and in the Elevator Lobby.

Log into the 4.206A control room touchpanel using the Lab Manager access code. 
Press Enter.

image2021-9-23_14-58-8.png

Select the Routing Tab

Assign the sources to the TVs as you wish to be the new daily default.

(1) Choose Source
(2) Choose Destination(s)
(3) Press Set


Confirm you like the assignments by checking the camera view of the room.

Press Set New Default.

Once this new default is set, the TVs will return to these sources:

  1. every day when the TVs turn on following the schedule (note schedule must be enabled)
  2. any time a presenter in the classroom presses Reset to Default on the advanced page of the teacher's classroom touchpanel.



Related content

Confluence Documentation | Web Privacy Policy | Web Accessibility