...
4. Find your printer in the list and right-click it, then click the “Printer properties” option.
5. Follow the steps below:
...
3. Click “Settings”.
4. Check this box if you to set up a your pin as well as the “Department ID”.
5. Input the “Department ID” and “Pin” if you set up a pin.
6. If you want a pop-up with the code each time you print, leave this checked, otherwise uncheck and you will not get Uncheck this option to prevent getting a pop-up each time you print.
7. Only use this option if you want to have to physically go to the copier and input your code to release the job.
Note: You can lock print jobs on demand each time you print, so this option is not necessary unless you want to lock down all print jobs.
8. Once you are finished, click “OK” and then “OK” again on the “Properties” window.
