Page Comparison

Open ProTools>Create Session or open existing session

Image Added

Choose Create Blank Session and or Open an existing session

24 Bit 48Khz and use I/O Last Used

Click OK

Image Added

Title the session and choose a destination to save the session.
DO NOT USE THE DESKTOP TO SAVE!!!


CLICK Save

Image Added

Next go to >Setup>Playback Engine

Image Added

Choose HDX

256 Samples

Voices 256 all default settings


Click OK

Image Added

Next go to >Setup>Hardware

Image Added

Go to Main Tab

Input should be set to Analog 1-2

Can change this to whatever you have plugged into the snake

Output should be set to Analog 1-2
Analog 3-4
Analog 5-6
Analog 7-8

Image Added

Next to to Setup > I/O

Image Added

Click on Output Tab

Image Added

Click on Import Settings

Image Added

Navigate to the I/O settings and choose UT_RTF_Default.pio

Image Added

Yes to Delete existing unused paths?

Image Added

Output will change to the default 5.1 surround settings as shown here


Click OK

Image Added

Next Import the video into the project

Choose Import Video

Image Added

Navigate to the video file that you want to view in the ProTools session

Image Added

Choose New Track

Import Audio


Click OK

Image Added

Choose to import at Session Start

Image Added

Choose to enable the Video Engine

Click Yes here

Image Added

If you would like to use the audio off the video file choose to save it to the default Audio Drive folder

Image Added

Video Engine will launch and you should be able to see the image on the projector automatically

Image Added