Pro Tools – HD Suites Surround 5.1 Session Guide with the S3 Console & the PT Control Dock
- Susanne Kraft
- Nic Rundell
- Jeremy Gruy
*The purpose of this guide is to setup your control surfaces for mixing with ProTools. Once the peripherals are setup, the guide will walk you through creating a blank session for 6 channel (5.1) surround sound mixing.
| If the Wi-Fi of the computer is already ON, turn the Wi-Fi OFF |  |
| Turn the computer Wi-Fi ON |  |
| Go to the WiFi Icon and choose > Create Network |  |
The default settings (for the Network Name and Channel ID) are fine. Click "Create" |  |
| Confirm that you are connected to the network that you just created |  |
Put your iPad on the ProTools Dock or use the one that is already there. TURN IT ON OR -Wake it up by pressing the "Home" key For more information about using the Dock please refer to the manual: ProTools Dock (for Apple iPad) You can also view a YouTube video which walks you through the functionality of the Dock and the App: |  |
| Go to Settings |  |
| Enable Wi-Fi |  |
| Choose the WI-FI network for the Device you just created. |  |
| Choose to "Join Anyway" |  |
On the iPad, open the PT Control Application If you don't have the app installed download it from here |  |
PRO TOOLS 5 CMB 1.122 Make sure the room is not muted on the Xilica Remote Aslo pres the 5.1 83db SMPTE X-Curve button to make the room 83db |
|
PRO TOOLS 4 CMB 1.1108A Check that the Mute Button is OFF press #1 button Make sure the Fixed 80db butt is pressed to make the room 80db Press button #2. |
|
On the computer, launch the EuControl application. Applications>Euphonix>EuControl Please be patient while launching - it may take a couple of minutes for the application to launch properly. |
|
Once the application is running, go to > Window > EuControl Settings |
|
The Surfaces Tab should list 3 devices: AVID S3 PT Dock Your iPad PT Control App It should look similar to the picture on the right. |
|
The Workstations Tab should list the computer that is connected |
|
Open ProTools > Create Session or Open existing session |
|
ProTools will ask you where the Waves Plugins are. Go to Applications > Waves > Plugins V9 |
|
Choose Create Blank Session and or Open an existing session If creating a blank session, Choose - Create Name the session - Local Storage BWF (.WAV) Audio File Type 24 Bit Depth 48kHz Sample Rate Last Used I/O Settings LOCATION (press the location button) CHOOSE one of the ProTools HARD DRIVEs VERY IMPORTANT - you know where you saved your session !!!click Create to create your session | |
| If you get this clcik OK |
|
Then go to >Setup>Session |
|
| Go to "Clock Source" and choose SYNC HD |
|
| This Message should pop up. Click OK |
|
Go to > Setup > Peripherals |
|
Navigate to the Ethernet Controllers Tab Enable the Ethernet Port > Ethernet #2
Choose to Enable EUCON |
|
If you would like to import a .aaf file use this workflow wiki. | |
Title the session and choose a destination to save the session. |
|
Next go to > Setup > Playback Engine |
|
Choose HDX Disk Playback Cache Size: Normal PowerTip: If you encounter buffer errors (ProTools keeps stopping during playback,) you can change the H/W Buffer Size and Disk Playback Cache Size of the Playback Engine to dedicate more computer resources for the playback process. |
|
Next go to > Setup > Hardware |
|
Go to Main Tab |
|
Analog In Tab should be set to this |
|
Analog Out tab should be set to this > |
|
Go to the Monitor Tab and make sure the MAIN AND ALT are set to "None" as shown here |
|
Mixer settings |
|
|
Welcome to the University Wiki Service! Please use your IID (yourEID@eid.utexas.edu) when prompted for your email address during login or click here to enter your EID. If you are experiencing any issues loading content on pages, please try these steps to clear your browser cache.