...
Next Import the video into the project | |
Navigate to the video file that you want to view in the ProTools session | |
Choose to import at Session Start | |
Choose to enable the Video Engine | |
If you would like to use the audio off the video file choose to save it to the default Audio Drive folder | |
Some suites have the Mackie Big Knob ProTools and AVID Inputs are labeled and use Monitor Select B make sure Mute is not pressed | |
Some of the Suites on the 1st floor have a Mixer. The mixer settings are shown here. Channel 1 and 2 are AVID playback are ProTools playback Also turn up the Master audio on the Board labeled Volume You don't have to set anything to see video out it will send it out automatically if you have the Black Magic Design Intensity Pro Connected properly |