...
| Setting up Crestron | |
|---|---|
| Go into Audio Mode |
|
| Click on Auxiliary |
|
| Click on HDMI Booth Aux |
|
| Click on Advanced (Gear Icon) |
|
| Click on Surround Sound |
|
| Click on the center button “DCP” |
|
| Click on Ref Vol Pro |
|
| Setting up Projector | |
|---|---|
| Turn on projector fan |
|
| Plug Ethernet cord into computer |
|
| Go to Network settings |
|
| Set up Ethernet IP address to 192.168.1.8, Subnet Mask 255.255.255.0 |
| |
| Go to Communicator App |
|
| Set Ethernet IP to 192.168.1.133 |
|
| Click Connect | |
| Close Projector Error Message window |
|
| Select Lamp button, so it’s blue |
|
| Select Dowser button, so it’s blue |
|
| Go to Chrome, login to browser by going to “192.168.1.226” |
|
| To access Dolby website, username and password is “doremi” |
|
| Go to Control tab > Ingest manager |
|
| For Cru Drive : Select a location > Local storage |
|
| Select film and then click “Ingest” button | |
| Go to Cinelister > Schedule (This is where you can add or edit an existing show) |
|
| Save show, password for manager is password > ok |
|
| Click on Playback, click play |
|
| When finished, remember to turn off lamp, wait 1 minute and then turn off fan |
