How to Play a DCP in CMB 4.122

Setting up Crestron
Go into Audio Mode
Click on Auxiliary
Click on HDMI Booth Aux
Click on Advanced (Gear Icon)
Click on Surround Sound
Click on the center button “DCP”
Click on Ref Vol Pro

Setting up Projector
Turn on projector fan
Plug Ethernet cord into computer
Go to Network settings
Set up Ethernet IP address to 192.168.1.8, Subnet Mask 255.255.255.0
Go to Communicator App
Set Ethernet IP to 192.168.1.133
Click Connect
Close Projector Error Message window
Select Lamp button, so it’s blue
Select Dowser button, so it’s blue
Go to Chrome, login to browser by going to “192.168.1.226”
To access Dolby website, username and password is “doremi”
Go to Control tab > Ingest manager
For Cru Drive : Select a location > Local storage
Select film and then click “Ingest” button
Go to Cinelister > Schedule (This is where you can add or edit an existing show)
Save show, password for manager is "password" > ok
Click on Playback, click play
When finished, remember to turn off lamp, wait 1 minute and then turn off fan	If you ever need to request a key for an encrypted DCP, the IMS2000 Serial Number 320028 server certificates are found here: smb://fileserver.moody.utexas.edu/software/Dolby