Easy DCP Player - How to Play a DCP

Launch Easy DCP Player
Enter Credentials or can run in Demo mode will play a short portion of the DCP
To play out a I/O device like Blackmagic or similar go to >easyDCP Player+>Preferences
HD SDI and choose the Enable HD-SDI Output and choose device and mode etc.
In Easy DCP Player choose >Open>Open Package
Navigate to the Folder containing the DCP files Choose ASSETMAP Choose open
The DCP will load. This might take a few minutes. You can get info in the lower left corner displaying the process of the file loading.
Click Play Icon on the file to load it into the player
Then hit Play button on the player to play
DCP player will start playing the DCP file Play rewind and FF controls as shown Might need to lower the Aspect ratio to play the file in realtime Scroll along the position indicator to spot check the file
Look at the audio Waveforms to double check the file audio. Go to View>Meters to see the surround sound and check levels
Make sure that the waveforms look right. Notice that Chanel 3 (center) has all the dialog audio make sure that is the case. You can watch the waveforms follow the image file when you play the file in Easy DCP. Make sure the audio files appear correctly.
To watch in Fullscreen on the IMac > click on >View>Fullscreen Play the entire DCP to check the quality of the image and sound. Make sure the tracks are correct and looks and sound good.