/
DMC 2.106 Zoom Setup Using Web Presenter -
DMC 2.106 Zoom Setup Using Web Presenter -
This wiki shows how to use the PTZ auditorium center camera without using the ATEM Switcher
Leave the BlackMagic Design ATEM switcher unplugged | |
Video Patch Panel patch whatever camera you want to use in zoom to the Blackmagic WebPresenter | |
Example: Patch Cam2 - DA OUT for the center camera output | |
patch into the AV Closet Program Recorder | |
For Audio we are going to use AUX 3 and AUX 4 to route audio | |
Press AUX 3 | |
When you press AUX 3 the board will read SEND to Cam2 L (AUX 3) | |
Press AUX 4 | |
When you press AUX 4 the board will read SEND to Cam2 R (AUX 4) | |
Example: Press AUX 3 and 4 Turn up all 4 mics to route audio to the camera 2 L and R There is also the audience mic if you would like to use it Master Fader up as well | |
Open Zoom and set the preferences >Preferences | |
Click on the Video Tab Choose Web Presenter HD | |
Click on the Audio Tab Choose Speaker as Crestron Choose Web Presenter HD as the Microphone |
Side note, if you notice the black magic web presenter flashing a black screen every 5 minutes or so, the fix is to cycle the web presenter
Related content
DMC 5.208 Zoom QuickSetup
DMC 5.208 Zoom QuickSetup
More like this
Using Zoom in the 5.522 Large Conference Room
Using Zoom in the 5.522 Large Conference Room
More like this
Blackmagic Design Web Presenter - OBS and Streaming Workflow
Blackmagic Design Web Presenter - OBS and Streaming Workflow
More like this
CMB Grad Hall CMB 4.112 Zoom QuickSetup
CMB Grad Hall CMB 4.112 Zoom QuickSetup
More like this
Zoom - Livestreaming a Final Review
Zoom - Livestreaming a Final Review
More like this
How to Record Only Audio and Slides in Zoom
How to Record Only Audio and Slides in Zoom
More like this