Page Comparison

- Recommended personal protective equipment (PPE) such as protective face masks and disposable gloves should be worn at all times while cleaning/sanitizing equipment.
- Ensure adequate ventilation prior to beginning any of the procedures.
- Hand washing with soap and water for a minimum of 20 seconds is recommended before and after PPE is worn.
- Hand sanitizer that contains at least 60% alcohol can be used if soap and water are not available.
- All work surfaces should be cleaned and sanitized before beginning and upon completion of each procedure. you begin and after you are finished with all items.

Clean work surface(s) with 75% isopropyl alcohol wipe. Repeat process again with new wipe in order to sanitize surface(s). Allow surface to air dry. Do not wipe surface (s) in order to dry.
Remove battery and memory card(s) from camera. Unplug power to camera (if applicable).
DO NOT wipe image sensor (behind back of lens cap inside camera body).
Wipe Clean camera with clean 75% isopropyl alcohol wipe. Wipe high touch areas such as grips, eyepiece, LCD screen and attachments . Repeat process again with new wipe in order to sanitize surface(s). Allow surface to air dry. Do not wipe surface (s) in order to dry. Oversaturated wipes should be squeezed out BEFORE wiping camera components. Wipe high touch areas such as grips, eyepiece, LCD screen and attachments.
Wipe power supply cables and any other high touch items included with camera kit. Batteries Battery charger SD card Attachments Accessories
DO NOT wipe coated lens surfaces on the front and back of the lens.
Clean lens with 75% isopropyl alcohol wipe. Repeat process with new wipe in order to sanitize surface(s). Allow surface to air dry. Do not wipe surface in order to dry. Oversaturated wipes should be squeezed out BEFORE wiping lens components. Wipe lens grips, caps, lens shade and around lens body.

Versions Compared