...
The two components of the fishing rod were the casting mechanism and the box for the electronics housing. The casting mechanism is made up of 1/4" acrylic links connected with 6 mm bearings at the joints. Before the final laser cuts of the acrylic links were made, the prototype was cut out of 1/4" wood. The electronics housing is a jigsaw box of 1/4" wood with 3 of the 4 walls glued to each other to minimize the collapsibility, yet retain the ability to open the box and view the circuit. At the bottom of the electronics housing is a 3D printed attachment with an opening that allows for a weight to be inserted at the front. view-file
Multimedia |
---|
name | 3ecbfe523c8fc8f6f4d58ee638eed3bf.mp4 |
---|
|
height250
Electronics and Circuitry
...
- 1 Arduino Uno Board
- 1 9V Battery
- 1 270 degree Servo Motor
- 1 Breadboard Breadboard w/ 2 powe
- 3 Push Buttons
- 3 220 Ohm Resistors
...