...
- be exported to .STL format, one model per file
- We will not print any STLs that contain more than one model
- be less than 14"x10"x14", scaled in inches
- pass the Shapeways tests for "White Processed Versatile Plastic" (3D Tools)
- You must provide a screenshot of the test results (contains checkmarks and render of your model) for each file
- If you change your file in any way after you run through Shapeways, you need to run it again
- We will not print any files without an associated screenshot
- You must provide a screenshot of the test results (contains checkmarks and render of your model) for each file
- have no naked edges
- We will not print any files containing naked edges
- have a minimum feature thickness of 1/16".
- We will not print any files containing feature thickness under 1/16"
- 1/16" is the minimum for simple and rectilinear geometries, but more
- More complex geometries (such as curves) should be thicker to avoid printing issues
- Even if your model passes Shapeways with no warnings, your print may break if complex features are 1/16"
Preparing to Submit
Naked Edges Test
...