Versions Compared

Old Version 11

changes.mady.by.user Rife, Randy

Saved on

compared with

New Version Current

changes.mady.by.user Jason Barborka

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

NOTE: UTGUEST AND EDUROAM WIFI WILL NOT WORK.  You must be connected to UTEXAS WIFI or with a VPN connection.

WINDOWS INSTRUCTIONS

  1. Map a Map a drive to your computer using the following path in the "folder" field:  \\austin.utexas.edu\disk\che-share\JMP . \JMP17-Win\JMP\JMP_Pro\17_0\Windows .

Image Added


  1. The Drive letter doesn't matter.  If If you are unsure how to do this,
    Read read “how to map a drive Windows 7” here or “how to map a drive Windows 10” here. (Mac users scroll down to the bottom of this page.) Make sure to uncheck "reconnect at login" and to check "connect as a different user".  Image Removed
  2. For the username, enter austin\your EID e.g.,
  3. Image RemovedImage Added
  4. Note: Attempting this from on-campus will work best.  If you are off-campus you must first follow these instructions to make a VPN connection, and then proceed with the instructions. VPN INSTRUCTIONS
  5. Once you successfully connect, you will see the following:
  6. Image RemovedImage Added
  7. Open Copy the Windows folder, open the version you would like, right click setup.exe (with the installer icon) right click > install as administrator.  Follow all installation promptsLICENSE FILE folder and "jmppro_1700)win.exe" installer to your desktop, then run the installer file. Follow the installation prompts, accepting all default options.
  8. After JMP has installed and you start it, you will likely be prompted for a license.  Copy the text file from the Browse to the LICENSE FILE folder from inside of the folder you ran the setup.exe file from, to your computer (desktop, etc.) and point the installer to the saved file.  and choose the license txt file inside.    
  9. You may ignore the "customize your license" message. 

...

        3.  Once connected, open the folder of the version you would like. Copy the text license file (not the .DMG file) to your desktop.  Run the .dmg you will see two folders labeled "16_0" and 17_0". Select the version 17 folder and copy it to your computer's desktop. Once it has finished downloading, browse that folder until you get to the following sub-folder: "Macintosh\JMP\JMP_Pro\17_0\Macintosh" Run the "jmppro__1700__mac.dmg" installer file and follow the installation prompts.

        4.  After the software is installed, it will be in your applications folder.  The first time it is started you will see the following message.  Click "open license" and point it to the ***.txt file you saved on your desktopbrowse the 17_0 folder until you get here: Macintosh\LICENSE FILE, then select the license file listed there.

             





Info

...