...
| |||
Use the TV Remote> Turn on the Monitor and make sure you select the HDMI input | Make sure the Green cable is plugged into the "Line Output" or the headphone output on the IMacs - cable may not be green just make sure the cable feeding the Aux input on the PreSonus. | ||
Go to the > System Prefs>Sound>Output tab Choose the LIne Out or Headphone Out (Imacs) | |||
Select the Aux Input and Turn up the volume. Make sure Speaker A is also lit up | |||
This Aux Input will also boost audio Make sure that the Aux button is not pushed in CUZ that'll make the audio not work | |||
Go to >Apple>System Prefs | |||
System Prefs>Blackmagic Desktop Video and click on it | |||
Make sure you see the Intensity Shuttle Thunderbolt | |||
or the AVID Artist DNxIO or the Ultrastudio 4K Extreme | |||
Launch ProTools | |||
Click OK Here | |||
Click OK Here | |||
When ProTools opens click "Cancel" on the Quick Start Dialog. We do not want to open a session yet. | |||
Go To Setup > Playback Engine | |||
On the Playback Engine Drop Down choose Built-in Output (Imacs) or Built In Line Output Mac Pros Blackmagic UltraStudio or Thunderbolt. . . Change the HW Buffer to 1024 Samples
| |||
Now go to Input and Output setup | |||
Click "Defautl" on the I/O setup | |||
Now that the routing and hardware is set up open the ProTools session if you have one created already or make a new session. | |||
Navigate to the session and open it or create a new session | |||
To create a new Protools session Type - Session Name - (session name) File Type - .WAV Bit Depth: - 24 bit Sample Rate: - 48kHz I/O last used Location - set to your hard drive NOT THE DESKTOP!!!! | |||
Next Import the video into the project | |||
Navigate to the video file that you want to view in the ProTools session | |||
Choose to import at Session Start | |||
Choose to enable the Video Engine | |||
If you would like to use the audio off the video file choose to save it to the default Audio Drive folder | |||
Last step is to open up the Input and Output view in ProToolsGo to > View>Edit Window Views> I/O > | |||
Choose the format 1080 or 720 23.98fps Choose the Playback Quality - Note if there is stuttering choose Draft but Full should work | |||
Choose the video resolution of the file from the choices. Probably best to choose a 1920x1080 that is the most common | |||
Make sure all the audio outputs are routed to the Built In Line Output 1-2 Stereo Mac Pros or Out 1-2 Stereo Built In Output 1-2 IMacs Then you should see image on the TV and hear audio the speakers |
If you do not see image on the
...