Page Comparison

...

One ballast box assembly shown in above pic

attachment to frame: 6 of this https://www.mcmaster.com/3039T15/ and 6 of this https://www.mcmaster.com/3039T16/

Plasma cutter assembly with dashboard & dashboard supports to save $$

• Plasma cutter bed size: 36"x24"
  
  Image Added
• New 36"x24"1/8" stock to fit plasma cutter bed size:
• Image Added

...

Driver Shields:

• Side Back (x2):
• Side Front (x2):
• Top Shield: 
• Steering Rack Shield: 286.82 x 473 x 4 mm

...

Seat Back & Headrest Backing Purchasing Assembly:

...

Belly Pan:


Plasma Cutter Purchasing Assembly:

Image Added

...

Dashboard: 

...

Image Added

Plate:

• 330mm x 105mm
• 13 x 4.14 in

Triangle Supports (x4):

• 105mm x 25.51mm 
• 4.14 x 1 in

...

Pedal Box:

• Connecting cubes (x2): 35 x 25 x 25 mm
  • stock size for both in 1 piece: 2"x1"x1.5" T6 6061
• Accel mounting tab: 70.75 x 24 x 20mm
• Brake mounting tab (x2): 39 x 27 x 20 mm
  • stock size for 2 accel tabs and 1 brake tab: 2"x3"x1.1" A36
• Pedal Base: 193 x 335 x14 mm
• Pedal arms (x2): 218.3 x 30 x 10 mm
• Foot Pads (x2): 40 x 80 x 7 mm
• Accelerator/brake tabs to be attached to pedal arms (x6): 35 x 20 x 5mm
• Wave springs: https://www.mcmaster.com/products/springs/stacked-wave-disc-springs-7/
• Pipe: length- 84 mm (x2 is 6 and 3/4" in length), dia- 13 mm (9/16")
• Potentiometer: https://p3america.com/slpc-series/
• Brake cylinders (x2): https://tiltonracing.com/product/78-series-master-cylinders/

Image Added

• Gas cylinder: 15mm dia, 9.1733in extended length, 6.8111in compressed length

...

Misc:

• Radio:
• Radio holder: 
• Roll cage foam: https://www.rollbarpadding.com/product/id-33
• Seatbelt 
• Seatbelt Mounts: HAVENT STARTED 
• Roll cage padding: https://www.rollbarpadding.com/product/id-33
  • ~187in of padding needed, sold as a set of two 36" sticks. Should buy 3, maybe 2 if we are looser w regs.

...

...