Page Comparison

printing with PGBK ink

Always print from photoshop or adobe reader:

In photoshop

1. open your image in photoshop 
2. Go to file > print
3. open the canon driver by pressing the “Print Settings” button in the bottom leftby Copies. Make sure Printer Manages Colors is checked
   Image Removed
   Image Added
4. then do the below:

Image Added

• Under "Commonly Used Profiles", click on the "Standard" profile. You can also use the "riso master" profile.
• Make sure "Duplex" is NOT selected.
• Select "Grayscale"
• Under "Media Type", select "Plain Paper" (it doesn't matter what kind of paper you're actually printing on, select "Plain Paper" regardless)
• Under Paper size, check 11 x 17
• Under "Print Quality", select "High"  ("Standard" might  work as well)

Then you should be good to go!

in Adobe Reader

1. open your image in Adobe Reader
2. Go to file > print
3. In this first screen, make sure Print in Grayscale is checked. Make sure "Print on both sides" is UNchecked.
   Then open the canon driver by pressing the “Properties” at the top. 
   Image Added
4. 1. then do the below:

   Image Modified

   
   

   • Under "Commonly Used Profiles", click on the "Standard" profile. You can also use the "riso master" profile.
   • Make sure "Duplex" is NOT selected.
   • Select "Grayscale"
   • Under "Media Type", select "Plain Paper" (it doesn't matter what kind of paper you're actually printing on, select "Plain Paper" regardless)
   • Under Paper size, check 11 x 17
   • Under "Print Quality", select "High" ("Standard" might  work as well)

   Then you should be good to go!