Page Comparison

• Anchor
  _GoBack _GoBack

  Attach the Lens to camera.
  
• Line up the red dot on the lens to the red dot on the camera housing.

Image RemovedImage Added

• Turn the lens Clockwise to secure it to the housing.

Image RemovedImage Added

• To remove the lens press this button and turn lens counter clockwise.

Image RemovedImage Added

• Battery Release to remove batteries for charging

Image RemovedImage Added

• Attach the handle to the top of the camera housing.
• Slide the handle bracket into the camera-housing bracket.

Image RemovedImage Added

• Screw down the handle on the bracket

Image RemovedImage Added

• Attach the handle remote cable to the camera body

Image RemovedImage Added

• NINJA Setup
  
  Slide the SSD hard drive in the caddy into the Ninja2
  
  Don't force it make sure you have it lined up correctly. Only goes in one way.

Image RemovedImage Added

• Place the battery on the back of the Ninja following the arrows on the back of the Ninja

Image RemovedImage Added

• Mounting the Ninja to the C100
  
  
  Screw in the mounting ball into the camera handle shown here

Image RemovedImage Added

• Screw in the mounting ball into the Ninja
• Tighten the handle of the mounting bracket around both mounting balls connecting the camera to the Ninja as shown here.

Image RemovedImage Added

• Insert battery or connect power.
• Turn camera on here.

Image RemovedImage Added

• Press the Menu button to access the camera set up menus

Image RemovedImage Added

• Use the button on the camera body handle to navigate the menus. Press button to select menu items.

Image RemovedImage Added

• Reset the camera Settings. Go to >Menu>Other Functions>Reset>All Settings

Image RemovedImage Added

• Select OK on the reset.

Image RemovedImage Added

• Set the date and time

Image RemovedImage Added

• Set the camera Frame Rate to either PF24 or 24P

Image RemovedImage Added

• Summary of settings
• Go to >Menu>Other Functions> System Frequency 59.94>Frame Rate 24P

Image RemovedImage Added

• May also want to turn on the WFM overlay. Go to>Menu>Other>
  WFM(LCD)

Image RemovedImage Added

• Make sure the HDSI cable is not plugged in and change the following two menu items Menu>Other Functions>HDMI>
  Timecode > On and>Record Command>On

Image RemovedImage Added

• Plug the HDMI cable into the C100

Image RemovedImage Added

• Plug the other end of the HDMI cable into the Ninja recorder. Notice that there is a "In" arrow and an "Out" arrow.
  The HDMI cable is plugged into the input shown here.

Image Removed

Image Added

• Turn On the Ninja 2 by pressing the on off button

Image Added

Image RemovedImage Added

• Change the Frame rate to 1080p23.98

Image RemovedImage Added

• Click the back arrow icon to Menu Icon return to the "Main Menu"

Image RemovedImage Added

• Click on "Time Code"

Image RemovedImage Added

• Make sure "Timecode" Menu is set to:
• Camera Trigger – CanonHDMI
• Source – HDMI – This will enable the feature to start recording on the Ninja when you press record on the camera.

Image Removed

Image Added

• Click Back button 2 x to get back to Main Page

Image Added

• Next format the hard drive in the Ninja.
• Press the HD icon on the main menu shown here

Image RemovedImage Added

• Press the "Format HDD/SSD" icon

Image RemovedImage Added

• Confirm you are sure you want to format and choose "Format"

Image RemovedImage Added

• Pressing the "Codec" icon on the main menu will prompt you to change the codec

Image RemovedImage Added

• Choose the desired codec. ProRes 422 or ProRes 422 HQ is fine

Image RemovedImage Added

• Go back to the main menu. You won't get the red record button unless you wave your hand in front of the camera or move the camera so it can recognize moving image in order to recognize the pulldown

Image RemovedImage Added

Press the REC button on the camera or press the REC on the touch screen of the Ninja to start recording. Press Stop on camera or Ninja to stop.Image Removed

Image Added

Press MON to se the video that is being recorded

Image Added

Double tap the screen with your finger to remove overlays. The RED border on the screen shows you are recording

Image RemovedImage Added

Press Stop on camera or Ninja to stop.

Image Added

Press >Menu>Scene and Shot >Play to access the lists of the shots recorded

Image RemovedImage Added

if you want to review just select one to play

Image RemovedImage Added

To power off go to Menu> Power Off

Image RemovedImage Added

To remove the SSD caddy you need to press this latch
upwards and grip the protruding part
Disk Caddy at
the top and bottom, pulling strongly
but carefully

You then must connect the SSD caddy to the docking station to connect to the computer to back up files.

Image RemovedImage Added

Connect the SSD Drive Caddy to the sled and the sled connects via USB to the computer. Copy file straight off for import into AVID, Premiere and or FCP.

Image RemovedImage Added

The files should have the same properties as this example. ProRes 422 HQ or plain ProRes 422

FPS 23.98

1920 x 1080

Image RemovedImage Added