...
Setting up Projector | |
---|---|
Turn on projector fan | |
Plug Ethernet cord into computer | |
Go to Network settings | |
Set up Ethernet IP address to 192.168.1.8, Subnet Mask 255.255.255.0 | |
Go to Communicator App | |
Set Ethernet IP to 192.168.1.133 | |
Click Connect | |
Close Projector Error Message window | |
Select Lamp button, so it’s blue | |
Select Dowser button, so it’s blue | |
Go to Chrome, login to browser by going to “192.168.1.226” | |
To access Dolby website, username and password is “doremi” | |
Go to Control tab > Ingest manager | |
For Cru Drive : Select a location > Local storage | |
Select film and then click “Ingest” button | |
Go to Cinelister > Schedule (This is where you can add or edit an existing show) | |
Save show, password for manager is "password" > ok | |
Click on Playback, click play | |
When finished, remember to turn off lamp, wait 1 minute and then turn off fan |