| Barry Green and Panasonic have created this ebook download it here | |
|---|---|
Setup the Tripod first using this wiki for the Libec Tripod - How to Setup and Use
| |
Open the back door and put the batter inside |  |
Or plug in the external power supply to the "DC Input" on the side of the camera. |  |
| Turn on the camera |  |
| Pull the viewfinder out of the slot on the top of the camera |  |
| Flip it up to see the menus and camera display |  |
| The camera uses SanDisk Extreme 64 GB 90 MB/S SDHC Cards |  |
| Make sure two cards are loaded into the card slots |  |
If you are prompted at the boot of the camera to set the time zone and date go ahead and do that |  |
On the side of the camera press the "Menu" button to get into the menus.
We are going to "Reset" the camera to defaults |  |
| Then Select "Other Functions" |  |
| Choose "Initial Set" |  |
| Choose "All" |  |
The camera will reboot and set all the menus back to default so any weird settings are erased on the camera. This way we can set the correct settings without any worry that something is set incorrectly.
|  |
General
Content
Integrations