Sony has made a simulator to let you get familiar with the menus | https://pro.sony.com/bbsccms/global.pkg/simulator/F55F5_MenuSimulator_2013/index.html |
This workflow is based on menu settings that can be seen either through the eyepiece or a monitor connected via SDI You will not see these menu settings on the LCD on the side of the camera | |
Connect the Monitor to SDI out #3 on the camera | |
Turn on the Sony F5 using the on switch | |
Click on Menu Button | |
Use the knob to Navigate through the menus and press the knob to select the menu item | |
Go to System Menu | |
Reset the camera to defaults | |
| |
Reset>Execute | |
Yep Execute again | |
Turn the camera off and on | |
Power off the camera wait about 30 seconds and power on the camera | |
If this menu comes up: It's a maintenance self check that the camera does every 5 days or so. It's best to let the camera do APR whenever it reminds you. | |
Press Menu to set up some more settings | |
Go back to System > System Setting and make sure the Frequency is set to 23.98 | |
Go to System > Record Format> HD | |
Choose SxS Format > XAVC 4K Class480 You can choose 300 for MOST cases as it will use less drive space but if you are needing more latitude use 480. | |
Confirm the Change Select Execute | |
class 480 is the 480Mb/s version of 4K XAVC. This gives a bit rate of…… drum roll……. 480Mb/s at 24/25/30fps. At 50 and 60fps it runs at a whopping 960Mb/s, this is the top limit for XAVC in it’s current form. Sony’s PMW-F5/F55 and the FS7 currently record XAVC using Class 300 which is up to 300Mb/s at 24/25/30fps or 600Mb/s at 50/60p. So as you can see Class 480 has the potential to improve the compressed image quality from these cameras still further should it ever make it into a camera. | |
Change to the 4K settings | |
Next we will show you how to set the camera to Slog 3 for recording Slog
Go to >User Menu | |
Base Settings | |
shooting mode - change to Cine EI | |
Execute | |
Go to Color Space and choose which slog to use SLog3 extends dynamic range about 1.5 stops. So it might be best for very high contrast (high dynamic range) scenes, and SLog2 might be best for low contrast "flat" scenes. | |
Here is what SONY states about the difference between S-Gamut3 and S-Gamut3.Cine: S-Gamut3:
1) SLog3SG3toSG3Cine.cube (provided below) + 2) Either Sony provided Look Profile or 3DLUT S-Gamut3.Cine:
| 4K 4096 x 2160 3DLUT’s are the Kelvin settings |
NOTE Use these Sony SXS Pro + | |
Put the card in the SD Card slot in the camera and format it. | |
Go to >Media> | |
Format Media> | |
Media A or B | |
Execute to format | |
Now set to record press record on the Sony F5 camera and it will begin recording | |
BACK UP THE FILES YOU RECORDED ON THE SXS CARDS IN THE EXACT FORMAT THAT WAS ON THE CARD MAKE SEPARATE FOLDERS FOR EVERY CARD | |
Open AVID and create a AVID 4096 x 2160 Color Space - YCbCr 709
Click OK to create the project | |
Go to >Tools>Source Browser | |
Navigate to the folder you backed up your card data and click on Link | |
The files should open in the selected Bin or an existing Bin depending on what the Target Bin was set to
Format should be 4096x2180/23.976 frame rate Video should be XAVC Intra 4K | |
Select the clips and choose > Clip>Consolidate/Transcode | |
Then select where you want to save the consolidated files and choose the “Target Video Resolution”
We recommend DNxHR LB MXF
Then Choose Transcode | |
Edit with the master clip not the linked file Notice the different icon for a linked file |
Manage space
Manage content
Integrations