Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Step-by-step installation guide for UT ChE students enrolled in a course utilizing @risk


Once your EID has been submitted by your professor, you will need to complete the following steps:

NOTE: UTGUEST AND EDUROAM WIFI WILL NOT WORK.  You must be connected to UTEXAS WIFI or with a VPN connection.

  1. Map a drive to your computer using the following path in the "folder" field  \\austin.utexas.edu\disk\che-share\Palisade . The Drive letter doesn't matter.  If you are unsure how to do this,

    Search “how to map a drive Windows 7” or “how to map a drive Windows 8”.  Make sure to uncheck "reconnect at login" and to check "connect as a different user". 
  2.  For the username, enter austin\your EID  e.g.,
  3.   
  4. Note: Attempting this from on-campus will work best.  If you are off-campus you must first follow these instructions to make a VPN connection, and then proceed with the instructions. http://www.utexas.edu/its/vpn/
  5. Once you are connected to the remote folder > right click on the DTSuite76... installer > run as admin > follow all of the Palisade installer prompts.


  • No labels