Go into Audio Mode | |
Click on Advanced | |
Click on Surround Sound | |
Click on DCP Playout Server for Speaker Inputs | |
Click on Theatrical Reference 85 db SPL Note there should be 3 yellow bars |
Projector Setup> Turn on projector fan | |
The inputs to the projector are here plug in the USB | |
or Crew drive | |
Log in as commpower on the Barco mac mini shown here | |
Launch Barco Communicator | |
Make sure you log in as the Service Technician Click the “User” Icon to log in as Service Technician | |
Might need to click connect | |
Log in as UN: st Password: default | |
Select UT-Projector Double click to load | |
Select Lamp button, so it’s blue | |
Select Dowser button, so it’s blue | |
Go to Chrome, login to browser by going to “192.168.1.226” | |
To access Dolby website, username and password is “doremi” | |
Go to Control tab > Ingest manager | |
For Cru Drive : Select a location > Local storage | |
Select film Icons make sure both are selected and then click “Ingest” button | |
You will see the ingest monitor copying the File off the USB to the internal server | |
If you ever want to check the ingest press the "Ingest in progress" button shown here | |
Go to Cinelister > Schedule (This is where you can add or edit an existing show) | |
UN is manager Password is "password" > ok | |
to find files >Control>Content Manager | |
Then go to Comp Playlist to see a list of files | |
To delete a file - select it in the list then click the delete button | |
You will be asked to confirm Click OK | |
To make a new show >Cinelister>Editor | |
Click on New | |
Or click Open to open an existing playlist | |
Add any element from the left side by clicking on it | |
See the list on the right side of the items you want to add in the playlist | |
When the playlist is finished click on Save | |
Title the show and click on save IF you are saving with a show that is already created it'll ask you to confirm you want to overwrite. | |
To delete a show | |
Select the show from the list | |
To play a show >Cinelister>Editor | |
Load your show or create your show Click OPEN - open your show - OK | |
Cinelister>Playback | |
Make sure lock is in manual | |
Then click on the play button | |
It will open the last loaded show it will play the last show that was called up in the Cinelister >Editor schedule | |
When finished, remember to turn off lamp, wait 1 minute and then turn off fan | If you ever need to request a key for an encrypted DCP, the IMS2000 Serial Number 320028 server certificates are found here: |
Click the Blue square to turn off projector bulb | |
White Square means the bulb is off |