New-Member Workday System Plan

	Agenda (hour by hour) - describe what you will be doing, if you are having them look at a resource or presentation link that here. I basically just want to see that y’all have made a concrete plan
Electrical	9 - 2:30 PM: Overall Solar Introduction (Michael, Philip) & Overall Electrical Introduction (Prat) + Lunch
Controls	peepee poo poo 2:30 PM - 3:30 PM: What is Controls: Meet the members, System Overview, System Diagram (past and present), Projects. 3:30 - 4:30 PM: Technology we use, download WSL+VScode. KiCAD. git bash! 4:30 - EOD : Regs! and how other systems interact with controls. New Members will look through regs and find control related ones.
BPS	womp womp Pilip and Michael yap sesh Prat yap sesh Lunch 2:00 - 2:45~ - System Presentation + Questions 2:45 - 3:30 - Software + Env setup 3:30 - 4:00 - git bash + WSL demo 4:00 - 5:00 - PCB HW
Power Systems	https://docs.google.com/document/d/1rWU2etd3HYzVbEDGeKEcsx4_TK2JQudNQoj-6wtfRb8/edit?usp=sharing
Power Gen
Data Acq	2:30-3:15 Data Acq. Architecture + Available Projects 3:15-4:00 Env. Setup 4:00-5:00 Data Acq. Onboarding Project

	Agenda (hour by hour) - describe what you will be doing, if you are having them look at a resource link that here. I basically just want to see that y’all have made a concrete plan
Mechanical
Dynamics
Body	https://docs.google.com/document/d/1gCezsoceA3uDwGNFBQdVpyVjkoLY6drBHVTPxcQxkbU/edit?usp=sharing
Aeroshell	9:30 - Members show up Michael and Philip presumably yap to whole team and such, philip says assume this is until 11:00 11:00 - have little aeroshell pow wow congratulate everyone on making team, yap a little about what we except from them as members set up slack, solidworks, bild set time for aeroshell meetings 11:30 - subsystems Aerodynamics Introduce the slides about the shell, get them to start researching(stealing designs from other cars) of different sections of the car Composites Advait gives presentation on basics of composites 12:30 - LUNCH pneumatic bolt through the head of a cow 2:00 - back to subsystem Aerodynamics solidworks lectures with dynamics cover all of sketches, fully defined and such Jason will lecture but addons and tips from Harshit or anyone else is good Composites Introduce members to composites research projects, let them do a little more research and figure things out, pick after a little bit 4:00 - swap to something Aerodynamics CAD challenge, we give them a 2D drawing and a certain amount of time, whoever does it best in the time gets a cookie Composites Continues research on specific topics
Electromechanical

	Agenda (hour by hour) - describe what you will be doing, if you are having them look at a resource link that here. I basically just want to see that y’all have made a concrete plan
Operations
CR
PR