Master Modeling a front suspension and using VSUSP - New Member Project

• I will record a video explaining roughly how to use master modeling in this project

instructions document link WITH UPDATED COMMENTS:

https://utexas.sharepoint.com/:w:/r/sites/ENGR-LonghornRacing/_layouts/15/Doc.aspx?sourcedoc=%7B23F6EEF0-36A3-4CBA-8214-5CD80AB5A658%7D&file=Suspension%20New%20Member%20Project.docx&action=default&mobileredirect=true&DefaultItemOpen=1

Parts to use / reference if you want: pull from BILD

22-SUS-003 RearTopBackShockFrameTab-1

22-SUS-011 ShockAbsorberAssembly.SLDASM

Master modeling / skeleton modeling:

• my examples are uploaded onto BILD under 24-26 startup

• showing the cross section of plates in one plane (front plane)

• cross section of the tube and ID/OD (front plane)

• the plate at the top is on the top plane (perpendicular intersecting plane to the front plane)

Here are examples from mine: