Skip to end of metadata
Go to start of metadata
Attendees
Goals
Design Review
Motor
Workday plans
Timelines
Purchasing
Discussion Agenda
Time | Item | Who | Notes |
---|
| Design Review | Pratyush Patra | Dry Run- Friday at 3 Presentation Sunday at 4
|
| Motor | Diya Rajon | Step 1 is power supply testing Battery needs to be fixed regardless, end of week Current plan is to test motor on ground with brakes fully engaged and wheel ratchet strap
|
| Workday | | Workday BPS Kadhir- ADC Mux board, finished Abigail- Filtering for voltage measurement Phoenix- PWM, Block diagram done, Header done, Reviewable C file EOD Nathan- busy, choose an ADC for Amperes Clark- Pick ADC mux for Leader by EOD Aneri- Rewievable C file EOD for SPI Kartik- SQL silly data, Figure out requirements of project Michael- Needs to be reviewed, Figure out Michael needs to do
Pablo Diya(Go up to pickle) Oscar- Goated motor stuff(config parameters) Eliana- Pedal Board, Requirements Mika- Daybreak dashboard, PR open, dialed Lucy- Working on lighting board, reqs done before workday, Start schematic Maddie, Krish- Check if schematic finished Jiwoo and Arnav- Test file for motor, Rewriting send tritium Akshay- Board to interface with Pi, reqs done EOD
Frank the Tank Li Carolyn and Frank- Open PR, Start layout? Changxu and Watts- Schematic basically done Jacob and Tony- Combine schematics, PR done EOD and start schematic Ravi- Schematic + Layout, Address changes and open new PR by EOD Twins- Silly thing
Andrew Tanya- Testing i2c noise w/ motor, Tanya and Tong going up to test the Array, Fixing array plan by EOD Aarav- BSP_ADC, Making good progress, Try and finish c file Erika- Started Voltage/Current sense for MPPT, testing board will get done. Figure out ADC choice by EOD. Aleena- Same as Erika, looking at Matthew’s sims, Look at PSpice to simulate Isaac- Same as Erika Praneel- Address software diagram comments Nikhil- Array sim for shaded cells Tong- Going up to assess array damage, Talk to Advaith about array cooling Roy- Web socket(422C) for Eclipse 0.4 Connor- SQL database, Done, Gonna talk to Kartik and use the database for Curvetracer Andrew- Talk to members, Talk to Prat
|
| Timeline | | |
| Purchasing | | |
Discussion Notes
Action items-
Talk to Philip about mechanical data reqs
Talk to Matthew about Leader schematic progress
Talk about lighting and pedal
Figure out Controls Leader Rework review status
Jim
Talk to Erika, Aleena, and Isaac