2024-10-29 Leads Meeting

Lucy - Lighting schematic in progress

Eliana - Worked on finding datasheet and connector info for the desired pedal sensor. Current selection might not be used. Completed brakeline portion of the schematic. Pushed her current progress

Maddie & Krish - Pushed schematic deadline to Nov 14th. Review required. Thanks Lakshay and Prat for leaving reviews!

Mika - Selected inputs sensors for dashboard. need to order

Akshay - Display is chosen, camera in progress. Blocked because current choice wasn’t waterproofed (mb)

Oscar - given controls leader-daughter which is comprised of dashboard

Second half of workday - tested motor noise on array (woop woop Ikococator)

Order display, cameras, lights, compute module

Michael (the cooler one) got his first PR merged in!

Fan board, Scrutineering, and PSOM are all in

• Most soldering and testing is going to have to happen outside of workday

Starting dev on some test boards

Admittedly, there is not as much work progress on boards as I’d like

Clark and Abby are making good progress on their boards

Pheonix was blocked for a bit by a Lakshay skill issue but is doing well in her project and is moving pretty fast

Michael is starting work on our watchdog

BPS members are getting a soldering showcase from Champers during workday

I will also be doing a talk on ✨ reading datasheets ✨

Updates Go Here

Updates Go Here

Updates Go Here

Updates Go Here

Power board schematic finished! good for review

Watts and Changxu almost done with an eFuse testboard schematic.

Shaun got polling test done for I2C BSP. Now working on interrupt based test.

Devin and Dylan finished contactor driver!!!!! Also finished high level block diagram of batt characterization board.

Jacob and Tony went through a bunch of edge cases with the Active Precharge board. Did a bunch of considerations into potential current pathways, floating nodes, etc.

Ravi still working on environmental board layout after several changes. Changes include creating a breakout board for humidity, temp, and airflow sensor. Currently trying to find a connector with a smaller form factor as per emech’s request.

Bosa and Kaden found a power monitoring chip for power monitoring board.

order contactor driver and (potentially) eFuse testboard

order mouser components

get power board reviewed and start layout

starting battery manufacturing

order hardware and aluminum

assemble universal enclosure and do water test workday

Updates Go Here

Updates Go Here

Updates Go Here

Updates Go Here

Aero Dependencies Chart

We selected who is working on different projects

We have someone for shell to shell and canopy tilting

Jason and Aidan need to make reference sketches and two starter shells b4 next workday