\uD83E\uDD45 Goals
Goals
💸 Operations
Electrify was successful
thank you to everyone who helped out
Austin Auto Festival this weekend so just more outreach this weekend
🛠️ Chief Engineer
\uD83D\uDDE3 System Updates
🚨 Controls:
Updates
Motor Controller isn’t working (CAN Issues)
Ongoing Pedals work
First draft lighting board schematic done
Good progress on rear camera
Leader layout has begun
Week Plan
meeting with Eliana tomorrow to finish schematic
Pickle tonight to fix MC
Upcoming Deadlines
first draft lighting schematic
reviewed pedals schematic
backup camera feasibility
documentation on MC parameters, purchase MC if issues cannot be resolved
🔥 BPS:
Updates
Week Plan
Upcoming Deadlines
⚡ Power Generation:
Updates
MPPT ADC breakout board review
Starting MPPT fw makefiles
Array layout w/ Jason
Temp and Irradiance sense board schematic start
constant current driver re make schematic
PV capture database implementation complete; continuing database manager
training loop for model works :DD
Week Plan
finish up array layout w/ jason & send it to d2
Upcoming Deadlines
📻 Data Acquisition:
Updates
Array and battery sim are hard
Leaderboard progress continues
Week Plan
We try our hand at the challenges placed before us
Upcoming Deadlines
- RF Receiver Schematic
- IMU/RPM board proposal
🔋 Power Systems:
Updates
Week Plan
Upcoming Deadlines
🔌 Electromechanical:
Updates
critical hardware back in car and harnessed
mock cooling intake done to send to regs
ready to manufacture mock modules
start characterization of a few cells with ps
Week Plan
have all battery box panel cutouts finished and dxfs created for waterjet
only layups will be a blocker then
Upcoming Deadlines
- EOD Sat - BB waterjet files
🧑🏭 Body:
Updates
Frame
Ergo
Week Plan
Frame
Ergo
Upcoming Deadlines
- Nov 16, 2024 - Roll cage position/dimensions set
🔩 Dynamics:
Updates
Unsprung
Suspension
Steering
Week Plan
Unsprung:
Steering:
Suspension:
Upcoming Deadlines
💨 Aeroshell:
Updates
Aerodynamics
Members have been taught ANSYS
Composites
Battery box layup, worked on resin infusion research and test fixtures for composite panels
Week Plan
Aerodynamics
Everyone have a sim done of the parts that they have made by next workday
Getting into the flow of make variation, sim variation
Composites
Battery box, first frame panel test subject, maybe machining test fixtures (not sure on this yet, depends on materials), design molds for wire cutter
Upcoming Deadlines
- Nov 16. 2024 - all members have run sim
✅ Action items
- rray and Aeroshell meet on workday to discuss array layout after D2 meeting