Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 5
Next »
- First open sequence in timeline – you can mark a segment or not depending if you want to export the whole thing or only part (explained later in this document)
- Next go to >File>Export>
|
|
Click on Options |
|
Click on "Custom" then click on "Format Options"
|
|
On Movie Settings Make sure "Video" is checked and click on "Settings" |
|
Compression choose Avid DNxHD
Frame Rate – current
Compressor – choose Millions of Colors
No Alpha and Color Levels 709
Resolutions choose between DNxHD 115 or 175 8bit
Click OK |
|
Resolutions choose between DNxHD 115 or 175 8bit |
|
Sound Settings
Click on Settings |
|
Linear PCM
Stereo and 48K
Render out at normal 16bit
Click OK |
|
The correct settings for exporting the DNxHD file shown here.
Double check that all your settings match this.
Of Course if you are working in 29.97 then make sure your choose that frame rate and also you could of chosen DNxHD 115 as the codec so that could be a difference as well. If all good click OK. |
|
Check the Export Settings
Export as QuickTime Movie
Use marks and enabled tracks if necessary
Custom – Video and Audio
1920 x 1080 aspect ratio
Color – 601/709
Native Dimensions 1920 x 1080
Click Save |
|
Pick a place to save the file
Title the .mov file
Save on your storage drive or SAN Volume
Click Save |
|
After exporting is completed open the file in Quicktime Player and open the "Movie Inspector" |
|
you will see that the movie is compressed as a AVID DnxHD Codec movie 1920 x 1080 |
|