How to use Assistant's In-Ear Monitor System

Grab the 'Booth Assistant' pack, and turn knobs until they reach "O" - between Left (L) & Right (R).

Note: This is relatively a good spot to start, you may need to increase or decrease volume. Also, if it does not POWER ON, you may need to change the batteries (AA)

Find the 'Talk to Assistant' mic and toggle the "push" button. Once Green, you will be able to talk into the mic and the assistant should be able to hear you.

Troubleshooting

If you are unable to here sound in the 'Booth Assistant' pack, start by making sure the "Group" & "Channel" on the pack - located
right above the batteries - matches the "Assistant In-Ear Tx" located on the rack.

NOTE: When talking into the 'Talk to Assistant' mic you should be able to see signal bouncing in the "INPUT LEVEL" meter

If you are not seeing