How to Patch in a Handheld (remote) 4th Camera to the Ross Switcher CMB 4.118 or any CMB Studio

First you need a camera that has SDI Output
Plug one end into the camera and the other end of the SDI to the CER Tie (Control Room Tie Line) for the studio you are in 4B is in this example
Go into the Control Room on CMB4 behind the Proctor Desk and look for the Lab Tie line in our case we are using Lab B Tie 1 patch out of that and into
4E JVC Remote Cam Input This will now be the Remote Cam input on the switcher in 4E
Next we need to setup the JVC camera Click on the Menu/Thumb button
On the LCD Main Menu will appear Go to A/V Set
Choose Video Set
Choose Display on TV - Make sure it's off so you don't see the overlays on screen
Go back to the Main Menu and go to System
Choose the Network and make sure that Network is on and HDMI is Off Needs to look just like this frame grab
Go back to Main Menu Go to A/V Set
Choose Video Set
Nest choose HDMI / SDI Out make sure it is on SDI
Go back to the Main Menu and go to System
Choose the Network and make sure that Network is on and HDMI is Off Needs to look just like this frame grab Click Menu to exit
Route the 4B Salvo Next On the Router Press Salvo
Choose RTF/4B
Then hit the Back Button to get to more routable buttons
Press Src/Dest
Choose TEST/SRC DA04 Or whatever is routed to DA04 we need to route REMCAM to DA04 Wrong route here we have Test routed to DA04 and we need remote cam so we need to fix it
Left side is the destination routing and right side will have the sources
Click on the blank button to get to the sources to route to DA04
Click Page Down till you find the REMCAM choice as a souce
Press REMCAM
Press REMCAM
Press Take
Now we have REMCAM routed to SRC DA04