Follow the First Steps to setup up the RODECaster | |
There are four microphones setup, just put on the headphones for whichever microphones are you using | |
If you would like to use the mic high-pass filter that you use when you want to put the mic really close to a source but don't want the added low end due to proximity effect Make sure the rolloff switch is flipped toward the mic | |
Make sure the rolloff switch is flipped toward the mic | |
Make sure the RODEcaster is set to Mix Minus Press Settings | |
Then Choose Hardware | |
Then Choose Advanced | |
Then choose Audio | |
These settings Make sure Enable Mix-Minus is turned on This will automatically mute the speakers in the room so you will not get feedback | |
Next we need to make sure the microphones are set correctly Select the Microphone channel selector softkey for the mic you want to use EX: #2 | |
Then Choose Microphone | |
Make sure it is set to RODE Broadcaster | |
Click the Back button to get to the previous menu | |
Click On Level | |
Make sure that Phantom Power is on and the Level is set to 18 | |
Turn up the sliders on the board and talk into the mic | |
Have each guest and interviewer speak directly into the front of the mic, and not from the sides | |
Set the levels by watching the meters as you speak. You'll be at a good level to record when the color of the level bars peak at green going into yellow (see picture →) You should never hit red! | |
You can adjust headphone volume with these knobs | |
Click on the Green REC button to start recording to the SD card | |
When recording the button will be RED | |
This icon is how much time you have left to record on the card | |
Conduct the narration, interview or podcast and when finished press REC button to stop recording | |
To hear what you did press the Settings Icon | |
Click on Podcasts | |
You can click on the top left and right arrows to navigate through the podcasts and click on the green play button to play the selection | |
Turn up a fader on the board to hear in the room speakers as well as the headset | |
Turn up the ceiling speaker volume to hear playback in the room Turn up the headphone volume for playback in headphones | |
Now to transfer your files off the RODECaster. Click the link to learn how. |
Manage space
Manage content
Integrations