Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

TROUBLESHOOTING

Power to camera

  • Make sure power cord is in good condition. At the end that goes into the battery slot in the camera, there is a 90° bend that can fray and short out.
  • Check the surge suppressor- if it gets switched off, none of the equipment will work.
  • Verify that the door to the battery compartment is shut all the way.

 

 

 

  • No labels

Confluence Documentation | Web Privacy Policy | Web Accessibility