Personal health and safety must come before anything else, no matter what the job. As part of first day orientation you will be given a Lab safety tour, which gives you basic information such as location of exits, fire extinguishers and first aid kids. If you are working in the preparation lab of PRC122 you will be required complete additional safety courses run by the Environmental Health and Safety (EHS) department. Many of these can be taken on-line.

NPL staff are here to help if you have questions or concerns. Alert the Collection Manager or supervisor if you:

•  injure yourself in any way, or have any allergic reaction to dust, pollen, or from an unknown source
•  notice an unsafe situation (electrical, chemical, structural, biological (pests)etc,.
•  can't find the required safety equipment* such as goggles or ear plugs.
•  have any other health or safety concerns.

          *Some safety equipment may require training or doctor's approval, such as certain kinds of personal air filters or respirators. 

Know where emergency tools and equipment are located

Know where the nearest telephone is in case of emergency. Know where fire extinguishers first aid kits, sinks, hose, bibs, showers, and eye wash stations are in your area. They are located on your GIS map print-out, and are also pointed out in the Lab Safety tour.

Fire safety

Know where all the exits are to the building in which you are working. Know where all the fire extinguishers are in every area in which you work. In the main building the library and the 2 rear offices do not have a fire exit should the hallway be engulfed. ALWAYS be aware of your surroundings while you work.

First Aid Kits

First Aid kits are available in each of the cages in building 33 and in building 122.  Familiarize yourself with their location in each building.  If the kits need any supplies inform the Collections Manager or Supervisor so they can be obtained.

PPE-Personal Protection Equipment

Dust masks

• Dust particle masks provide protection from airborne irritants stirred up during cleaning of the specimens.  These are always be available.  If you cannot find any, ask the Collections Manager or Supervisor.

Gloves

• Disposable white cotton gloves or latex or vinyl gloves are provided to protect the specimens from body oils and perspiration on the hands of the worker, and to protect the worker from the dehydrating and irritating effects of the dust and specimen matrix.

Dress for Success: Beyond PPE

Clothing

• Clothing that leaves large areas of skin exposed is not suitable when using hazardous chemicals in laboratories. Jewelry and loose clothing, e.g. ties, baggy pants and coats are also inappropriate. To minimize the risk when working with hazardous chemicals, the following personal protective clothing are recommended:
• Lab coats or coveralls should be worn buttoned and with sleeves rolled down, constructed of cotton fabric and be nonflammable, where necessary. Required if personal clothing leaves large areas of skin exposed, e.g. shorts or short sleeve shirts.
• Rubber coated aprons can be worn to protect against corrosive liquids and may be worn over a lab coat or coveralls. Required if personnel are at risk of splashes from corrosive liquids.

Foot Protection

• Shoes which fully cover the feet must be worn in the laboratory and the cages! Sandals or perforated shoes are never appropriate, and the wearing of cloth shoes may not be appropriate.
  
  

General Safety Instructions:

Don't lock anyone in the cages

The cages in building 33 (Northwest, Southwest, East) are each locked with a combination padlock, from outside the cage.  It is therefore possible to lock someone inside the cage.  Before you lock each cage, MAKE SURE NO ONE IS STILL IN THE CAGE.  WALK UP AND DOWN EACH AISLE, LOOK IN EVERY CORNER and YELL THAT YOU ARE LOCKING UP. If you are working in the cages we recommend that you take a cell phone with you.

Power tools

Power tools include anything that whirs really fast, makes a loud noise, and can cut off, grind off, chop off, or skewer body parts in the wink of an eye.  In other words, they are DANGEROUS. Grinders, electric screwdrivers, circular saws, chain saws, drills, routers, are all types of power tools.

Make sure the Collections Manager or Supervisor knows you are using power tools. Ultimate responsibility for your safety lies with those in charge of the NPL. They must know when you are operating dangerous equipment. Only operate power tools if you have completed NPL tool use training for that piece of equipment. Before starting, make sure there is someone close by who knows you will be using a power tool. If an accident occurs, assistance will be available. If others know you are working with dangerous equipment they will be more likely to check on you, and will respond more quickly if they notice a problem. When you use most power tools you should wear protective goggles or a face shield.  Ask the Collections Manager or Supervisor for protective gear. TIE BACK long hair.

Scalpels

When using scalpels it is imperative you pay close attention to what you are doing. Blades are very sharp and it does not take much pressure to pierce the skin. Change the blade as often as necessary. Dull blades will drag and skip, causing tears and snags. Replace blades as often as necessary. Replacement blades are in the chest of many drawers in the Prep Room, in a drawer labeled 'New Blades'.

You must ALWAYS dispose of used scalpel blades in the red Sharps/Bio-hazard container. Failure to do so could result in members of the Housekeeping staff injuring themselves when they do trash pick up.

Chemical guidelines in the lab:

Fume hood use

Proper use of the fume hood is important to promoting a healthy work place. UT recently provided labs with a helpful safety sticker, placed next to the sash, that shows how high the sash should be, energy consumption and quality of ventilation. The unit in the Prep Lab is equipped with lights and electricity. There should never be anything stored in the fume hood. Doing so is a violation of UT EHS regulations and will result in the lab getting written up.

Camping gas

NPL commonly uses camping gas as a heat source for 'smoking' specimens prior to photographing them. The nozzle on the regulator controls how much gas is let out, and a striker is used to ignite the gas. Never open the regulator nozzle unless you are ready to use it- this means the striker is at hand, with enough flint to make a spark, and the specimen you are whitening is in position inside the fume hood. Camping gas canisters are not to be stored in the fume hood- they belong in the Flammables Cabinet.