List of parts required
| Parts Description | Quantity | |
| 1 | Bearings 5ID x 11ODx 4mm | 10 |
| 2 | 5 mm E-rings | 10 |
| 3 | Black Acrylic 24x24x 1/4" | 1 |
| 4 | Acrylic 200mm x 200 mm x 3 mm | 1 |
The linkages were manufactured using Black Acrylic via Laser-cutting. The shafts and spacers used to hold the bearings and linkages were 3D printed. The E- Rings were used in each bearing to hold its position. The base rack and shelves were also manufactured using Acrylic and Laser Cutting.
For the Assembly, the holes for the screws were pre-desgined and produced using laser cutting and a 3dprinter. Spacers were designed and 3d printed so that there would not be any interferences between the linkages.
For holding the shelves, identical linkages were produced so that the shelves would be held on both sides and enclosed in the rack.