Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

The original drafts for the cat toy explored ideas on how we wanted to approach the mechanism’s function. We wanted the toy to have random movements to keep the cat entertained.


Our first ideas were too focused on generating random movements through the use of programming. After meeting with the TA and reviewing some new ideas, we decided to power a four-bar rocking mechanism with a motor, and have it roll over a cam system to create unique vertical movements.




This plan allows for 2 degrees of freedom using the constant rotation of the motor as the only input. While the mechanism will inevitably begin to repeat itself given enough time, the amount of freedom using a cam system gives in designing a pattern for the toy suppresses this issue into insignificance.

It may also be possible to allow for 3 degrees of freedom by implementing a four-bar slider mechanism that will push the toy in and out. While this will not be a part of the prototype, it could be possible to add it afterwards.

  • No labels