1.
...
Left-click the “Windows” (aka Start) icon at the bottom left of the screen
...
2. Type “Control.exe” into the “Open” bar and click “OK”.
3. Make sure the “View by” in the top right is set to “Large Icons” and then open the “Devices and Printers” link.
...
and type in "Printers" and select "Printers & scanners"
2. In the Printers & Scanners window you should see the GLT printers if you followed the installation steps.
3. Left-click on one and then click Manage
4. Click the “Printer properties” option.
5. Follow the steps below:
1. Click the “Device Settings” tab at the top.
2. Click the dropdown User Management drop down and select “Department ID Management”
...
4. Check this box to set your pin PIN as well as the “Department ID”.
5. Input the provided “Department ID” and “Pin”“PIN”.
6. Uncheck this option "Confirm Department ID/PIN When Printing" to prevent getting a pop-up each time you print.
...
Note: You can lock print jobs on demand each time you print (secure print), so this option is not necessary unless you want to lock down all print jobs.
...