2024-10-14 Mechanical Meeting

Announcements

• Ansys whitelist is closed. If your members did not fill it out, they will not be able to install Ansys.

• The frame is detached from the shell. Thank you to everyone who helped out!

  • Next steps are refilling and rebleeding the brakes. This is to test the motor and try to recreate the conditions that caused controls to fault at comp

    • TLDR: Controls system faults when we accelerate too fast or go above a certain max speed. Unsure what the issue is, perhaps motor controller config

• ClickUp use has not been satisfactory

  • Don’t just fill out ClickUp because we tell you to

  • It is a tool that will make your life easier. Once it is up-to-date it takes minimal effort to maintain it so long as you do it constantly

  • This is also a way for me to keep track of everyone’s progress. I don’t only want to have progress checks during meetings, but it also isn’t sustainable for me to text each one of you to ask about progress

  • Don’t want to micromanage but it seems we have this reminder every week

  • Ideally in the future we should just be able to pull up ClickUp for these meetings and ask about progress

• Reminder: new members should be given homework each week to develop their knowledge of their system and their engineering skills

  • Two parts:

    • Theoretical learning resource: youtube video, textbook chapter, etc

    • Engineering skill exercise: CAD exercise, hand-calcs, etc

  • They will need to do both of these things in their starter projects, so we should build up a habit

• Philip’s Concerns

  • Worried members may be getting introduced to work without a sufficient understanding of the theory behind their system

  • Make sure to check in with members about if they are satisfied with the task given to them, if they know what to do, if they feel lost

    • I spoke to several members on workday who expressed confusion at what they were actually supposed to be achieving

SRR Key Takeaways

https://cloud.wikis.utexas.edu/wiki/x/LwdtD

Overall

• we need to define how we are going to do reference points on the mold, and confirm that the knowledge is transferred

Aerodynamics

• We need to solidify the plan for splitting up work and creating different parts of the shell(nose, tail, how to we avoid it messing up the overall geometrey)

• Talk about roll cage in an intersystem meeting, because thats the next big thing that defines what we do

Composites

• Figure out design of windshield with respect to the polycarb and what materials we should use

• LOTS of wesley notes, not worth putting all in this spot since its lot of smaller specific notes

• resin infusion is a risk and will cost a lot of money (vacuum)

• consider having aeroshell PDR at the same time as dynamics and frame CDR

Body SRR Takeaways

https://cloud.wikis.utexas.edu/wiki/x/i4V4D

Action Items

• Setting suspension hardpoints
• Upright bearing selection
• Brake caliper selection
• Shock absorber selection
• Identify operating conditions

• Completion of composite testing plans with timelines and purchasing sheets
• Have roll cage meeting with body

• Suspension hardpoint widths for Dynamics
• Identify driver position
• Have roll cage meeting with aeroshell

• Identify nextgen battery box dimensions

Dynamics

Body

Aeroshell

Emech

Weekly Updates

Daybreak Progress

Questions people want to ask

What do you need from me this week?