Skip to end of metadata
Go to start of metadata
1/20/24
Name | Work started/completed |
---|
Jack | - Make hole on dashboard for BPS Fault LED - needs to talk to Prat to see what LED is chosen
|
Kenta | - Send communications design to Jacob & Nathan to be reviewed
|
Trevor | |
EVERYONE | - Trained on manual mill, simple edge-finding, facing
|
Next Workday Plans | - Laser cut all panels, attach the panels together. Purchase 2x4s for the frame of the top shell holder, as well as L-brackets, an foam tape. May need to shorten existing holder so Aero can reach inside for layups.
|
1/27/24
Name | Work started/completed |
---|
Jack | - Made hole on dashboard for BPS Fault LED, sent in for review, FEA on brake mounting tabs
|
Kenta | - Send communications design to Jacob & Nathan to be reviewed
|
Trevor | - Finalizing brake design, FEA on mounting tabs
|
EVERYONE | |
Next Workday Plans | - Laser cut all panels on Monday 1/29. On workday, attach panels and purchase 2x4s for the frame of the top shell holder, as well as L-brackets, an foam tape. May need to shorten existing holder so Aero can reach inside for layups.
|