Setting up the Crestron System
1. Go into Audio Mode
2. Click on Auxiliary > HDMI Booth Aux
3. Click on Advanced (Gear Icon)
4. Click on Surround Sound > Ref Vol Pro
5. Under “Sound Override” section, click on the center button “DCP”
Setting up Projector
1. Turn on projector fan
2. Plug into computer to Ethernet cord
3. Go to Network settings
4. Set up Ethernet IP address to 192.168.1.8, Subnet Mask 255.255.255.0
5. Go to Communicator App
6. Set Ethernet IP to 192.168.1.133
7. Click Connect
8. Close Projector Error Message window
9. Select Lamp button, so it’s blue
10. Select Dowser button, so it’s gray
11. Go to Chrome, login to browser by going to “192.168.1.226”
12. To access Dolby website, username and password is “doremi”
13. Go to Control tab > Ingest manager
14. For Cru Drive : Select a location > Local storage
15. Select film and then click “Ingest” button
16. Go to Cinelister > Schedule (This is where you can add or edit an existing show)
17. Save show, password for manager is password > ok
18. Click on Playback, click play
19. When finished, remember to turn off lamp, wait 1 minute and then turn off fan!