How to Play a DCP in CMB 4.122

Setting up Crestron
Go into Audio Mode
Click on Auxiliary
Click on HDMI Booth Aux
Click on Advanced (Gear Icon)
Click on Surround Sound
Click on the center button “DCP”
Click on Ref Vol Pro

Setting up Projector
Turn on projector fan
Plug Ethernet cord into computer
Go to Network settings
Set up Ethernet IP address to 192.168.1.8, Subnet Mask 255.255.255.0
Go to Communicator App
Set Ethernet IP to 192.168.1.133
Click Connect
Close Projector Error Message window
Select Lamp button, so it’s blue
Select Dowser button, so it’s gray
Go to Chrome, login to browser by going to “192.168.1.226”
To access Dolby website, username and password is “doremi”
Go to Control tab > Ingest manager
For Cru Drive : Select a location > Local storage
Select film and then click “Ingest” button
Go to Cinelister > Schedule (This is where you can add or edit an existing show)
Save show, password for manager is password > ok
Click on Playback, click play
When finished, remember to turn off lamp, wait 1 minute and then turn off fan!

Setting up Projector

1. Turn on projector fan

2. Plug into computer to Ethernet cord

3. Go to Network settings

4. Set up Ethernet IP address to 192.168.1.8, Subnet Mask 255.255.255.0

5. Go to Communicator App

6. Set Ethernet IP to 192.168.1.133

7. Click Connect

8. Close Projector Error Message window

9. Select Lamp button, so it’s blue

10. Select Dowser button, so it’s gray

11. Go to Chrome, login to browser by going to “192.168.1.226”

12. To access Dolby website, username and password is “doremi”

13. Go to Control tab > Ingest manager

14. For Cru Drive : Select a location > Local storage

15. Select film and then click “Ingest” button

16. Go to Cinelister > Schedule (This is where you can add or edit an existing show)

17. Save show, password for manager is password > ok

18. Click on Playback, click play

19. When finished, remember to turn off lamp, wait 1 minute and then turn off fan!