Step-by-step installation guide for UT ChE students enrolled in a course utilizing @risk
Once your EID has been submitted by your professor, you will need to complete the following steps:
NOTE: UTGUEST AND EDUROAM WIFI WILL NOT WORK. You must be connected to UTEXAS WIFI or with a VPN connection.
Map a drive to your computer using the following path in the "folder" field \\austin.utexas.edu\disk\che-share\Palisade . The Drive letter doesn't matter. If you are unsure how to do this,
Search “how to map a drive Windows 10”. Make sure to uncheck "reconnect at login" and to check "connect as a different user".
- For the username, enter austin\your EID e.g.,
- Note: Attempting this from on-campus will work best. If you are off-campus you must first follow these instructions to make a VPN connection, and then proceed with the instructions. http://www.utexas.edu/its/vpn/
- Once you are connected to the remote folder > right click on the DTSuite76... installer > run as admin > follow all of the Palisade installer prompts.
Related articles