Getting started at TACC

Getting to a remote computer

The Terminal window

• Macs and Linux have a Terminal program built-in – find it now on your computer
• Windows 10 or later has ssh and scp in Command Prompt or PowerShell (may require latest Windows updates)
  • Open the Start menu → Search for Command
    

From now on, when we refer to "Terminal", it is either the Mac/Linux Terminal program, Windows Command Prompt or PowerShell, or the PuTTY program.

SSH

ssh is an executable program that runs on your local computer and allows you to connect securely to a remote computer. We're going to use ssh to access the Lonestar6 compute cluster at TACC (Texas Advanced Computing Center), where the remote host name is ls6.tacc.utexas.edu.

In your local Terminal window:

ssh <your_TACC_userID>@ls6.tacc.utexas.edu

# For example:
ssh abattenh@ls6.tacc.utexas.edu

• Answer yes to the SSH security question prompt
  • this will only be asked the 1st time you access ls6
• Enter the password associated with your TACC account
  • for security reasons, your password characters will not be echoed to the screen
• Get your 2-factor authentication code from your phone's TACC Token app, and type it in

The bash shell

You're now at a command line! It looks as if you're running directly on the remote computer, but really there are two programs communicating:

1. your local Terminal
2. the remote shell

There are many shell programs available in Linux, but the default is bash (Bourne-again shell).

The Terminal is pretty "dumb" – just sending what you type over its secure sockets layer (SSL) connection to TACC, then displaying the text sent back by the shell. The real work is being done on the remote computer, by executable programs called by the bash shell (also called commands, since you call them on the command line).

About the command line

Read more about the command line and commands on our Linux fundamentals page:

• The bash shell REPL and commands
• Getting help
• Literal characters and metacharacters
• About command line input

Setting up your environment

Setup your login profile (~/.bashrc)

Now execute the lines below to set up a login script, called ~/.bashrc. [ Note the tilde ( ~ ) is shorthand for "my Home directory". See Linux fundamentals: Pathname syntax ]

When you login via an interactive shell, a well-known script is executed to establish your favorite environment settings. The well-known filename is ~/.bashrc (or ~/.profile on some systems), which is specific to the bash shell.

We've pre-created a common login script for you that will help you know where you are in the file system and make it easier to access some of our shared resources. To set it up, perform the steps below:

cd
ls -la 
# Do you see a .bashrc file? If so, save it off
cp .bashrc .bashrc.beforeNGS

If your Terminal has a dark background (e.g. black), copy this file:

cp /corral-repl/utexas/BioITeam/core_ngs_tools/login/bashrc.corengs.ls6.dark_bg  ~/.bashrc
chmod 600 ~/.bashrc

If your Terminal has a light background (e.g. white), copy this file:

cp /corral-repl/utexas/BioITeam/core_ngs_tools/login/bashrc.corengs.ls6.light_bg  ~/.bashrc
chmod 600 ~/.bashrc

So why don't you see the .bashrc file you just copied when you do ls? Because all files starting with a period (dot files) are hidden by default. To see them add the -l (long listing) and -a (all) options to ls:

# show a long listing of all files in the current directory, including "dot files" that start with a period
ls -la  

Read more about File attributes

Since your ~/.bashrc is executed when you login, to ensure it is set up properly you should first log off Lonestar6 like this:

exit

Your Terminal  has logged off of Lonestar6 and is back on your local computer.

Now log back in to ls6.tacc.utexas.edu. This time your ~/.bashrc will be executed to establish your environment:

You should see a new command line prompt:

ls6:~$

The great thing about this prompt is that it always tells you where you are, which avoids you having to execute the pwd (present working directory) command every time you want to know what the current directory is. Execute these commands to see how the prompt reflects your current directory.

# mkdir -p says to create all parent directories in the specified path
mkdir -p ~/tmp/a/b/c
cd ~/tmp/a/b/c

# Your prompt should look like this:
ls6:~/tmp/a/b/c$ 

The prompt now tells you you are in the c sub-directory of the b sub-directory of the a sub-directory of the tmp sub-directory of your Home directory ( ~ ).

Your login script has configured this command prompt behavior, along with a number of other things.

Create some symbolic links and directories

Create some symbolic links that will come in handy later:

cd  # makes your Home directory the "current directory"
ln -s -f $SCRATCH scratch
ln -s -f $WORK work
ln -sf /work/projects/BioITeam/projects/courses/Core_NGS_Tools CoreNGS

ls # you'll see the 3 symbolic links you just created

Symbolic links (a.k.a. symlinks) are "pointers" to files or directories elsewhere in the file system hierarchy. You can almost always treat a symlink as if it is the actual file or directory.

Unlink

ls -l

Set up a ~/local/bin directory and link a script there that we will use in the class.

mkdir -p ~/local/bin
cd ~/local/bin
ln -s -f /work/projects/BioITeam/common/bin/launcher_creator.py

Since our ~/.bashrc login script added ~/local/bin to our $PATH, we can call any script or command in that directory with just its file name. And Tab completion works on program names too:

cd

# hit Tab once after typing "laun"
# This will expand to launcher_creator.py

Details about your login script

Let's take a look at the contents of your ~/.bashrc login script, using the cat (concatenate files) command. cat simply reads a file and writes each line of content to standard output (here, your Terminal):

cd  
cat .bashrc

You'll see the following (you may need to scroll up a bit to see the beginning):

#!/bin/bash
# TACC startup script: ~/.bashrc version 2.1 -- 12/17/2013
#   This file is NOT automatically sourced for login shells.
# Your ~/.profile can and should "source" this file.
# Note neither ~/.profile nor ~/.bashrc are sourced automatically
# by bash scripts.
#   In a parallel mpi job, this file (~/.bashrc) is sourced on every
# node so it is important that actions here not tax the file system.
# Each nodes' environment during an MPI job has ENVIRONMENT set to
# "BATCH" and the prompt variable PS1 empty.
#################################################################
# Optional Startup Script tracking. Normally DBG_ECHO does nothing
if [ -n "$SHELL_STARTUP_DEBUG" ]; then DBG_ECHO "${DBG_INDENT}~/.bashrc{"; fi
##########
# SECTION 1 -- modules
if [ -z "$__BASHRC_SOURCED__" -a "$ENVIRONMENT" != BATCH ]; then
  export __BASHRC_SOURCED__=1
  module load launcher
fi
############
# SECTION 2 -- environment variables
if [ -z "$__PERSONAL_PATH__" ]; then
  export __PERSONAL_PATH__=1
  export PATH=.:$HOME/local/bin:$PATH
fi
# For better colors using a dark background terminal, un-comment this line:
#export LS_COLORS=$LS_COLORS:'di=1;33:fi=01:ln=01;36:'
# For better colors using a white background terminal, un-comment this line:
#export LS_COLORS=$LS_COLORS:'di=1;34:fi=01:ln=01;36:'
export LANG="C"  # avoid the annoying Perl locale warnings 
export BIWORK=/work/projects/BioITeam
export CORENGS=$BIWORK/projects/courses/Core_NGS_Tools
export BI=/corral-repl/utexas/BioITeam
export ALLOCATION=OTH21164        # For ls6        Group is G-824651
##export ALLOCATION=UT-2015-05-18 # For stampede2  Group is G-816696

##########
# SECTION 3 -- controlling the prompt
if [ -n "$PS1" ]; then PS1='ls6:\w$ '; fi
##########
# SECTION 4 -- Umask and aliases
#alias ls="ls --color=always"
alias ll="ls -la"
alias lah="ls -lah"
alias lc="wc -l"
alias hexdump='od -A x -t x1z -v'
umask 002
##########
# Optional Startup Script tracking
if [ -n "$SHELL_STARTUP_DEBUG" ]; then DBG_ECHO "${DBG_INDENT}}"; fi

There's a lot of stuff here; let's look at just a few things.

Environment variables

The login script sets several environment variables.

export BIWORK=/work/projects/BioITeam
export CORENGS=$BIWORK/projects/courses/Core_NGS_Tools

Environment variables are like variables in other programming languages like python or perl (in fact bash is a complete programming language). 

They have a name (like BIWORK above) and a value (the value of $BIWORK is the pathname of the shared /work/projects/BioITeam directory).

To see the value of an environment variable, use the echo command, then the variable name after a dollar sign ( $ ):

echo $CORENGS

We'll use the $CORENGS environment variable to avoid typing out a long pathname:

ls $CORENGS

Read more about Environment variables

Shell completion with Tab

You can use these environment variables to shorten typing, for example, to look at the contents of the shared /work/projects/BioITeam directory as shown below, using the magic Tab key to perform shell completion.

Follow along with this:

# hit Tab once to expand the environment variable name
ls $BIW 

# hit Tab again to expand the environment variable
ls $BIWORK/

# now hit Tab twice to see the contents of the directory
ls /work/projects/BioITeam/

# type "pr" and hit Tab again
ls /work/projects/BioITeam/pr

# type "co" and hit Tab again
ls /work/projects/BioITeam/projects/co

# type "Co" and hit Tab again
ls /work/projects/BioITeam/projects/courses/Co

# your command line should now look like this
ls /work/projects/BioITeam/projects/courses/Core_NGS_Tools/

# now type "mi" and one Tab
ls /work/projects/BioITeam/projects/courses/Core_NGS_Tools/mi
 
# your command line should now look like this
ls /work/projects/BioITeam/projects/courses/Core_NGS_Tools/misc/

# now hit Tab once
# There is no unambiguous match, so hit Tab again
# After hitting Tab twice you should see several filenames:
# fastqc/ small.bam  small.fq   small2.fq

# now type "sm" and one Tab
# your command line should now look like this
ls /work/projects/BioITeam/projects/courses/Core_NGS_Tools/misc/small
 
# type a period (".") then hit Tab twice again
# You're narrowing down the choices -- you should see two filenames
ls /work/projects/BioITeam/projects/courses/Core_NGS_Tools/misc/small
# small.bam  small.fq

# finally, type "f" then hit Tab again. It should complete to this:
ls /work/projects/BioITeam/projects/courses/Core_NGS_Tools/misc/small.fq

Extending the $PATH

When you type a command name the shell has to have some way of finding what program to run. The list of places (directories) where the shell looks is stored in the $PATH environment variable. You can see the entire list of locations by doing this:

echo $PATH

As you can see, there are a lot of locations on the $PATH.

Here's how the common login script adds the ~/local/bin directory you created above, to the location list, along with a special dot character ( . ) that means "here", or "whatever the current directory is". In the statement below, colon ( : ) separates directories in the list. (Read more about Pathname syntax)

export PATH=.:$HOME/local/bin:$PATH

Setting up the friendly command prompt

The complicated looking if statement in SECTION 3 of your .bashrc sets up a friendly shell prompt that shows the current working directory. This is done by setting the special PS1 environment variable and including a special \w directive that the shell knows means "current directory".

##########
# SECTION 3 -- controlling the prompt
if [ -n "$PS1" ]; then PS1='ls6:\w$ '; fi