CMB 6.102 - How to Operate Audio for Video Mixer - Allen & Heath
- Jeremy Gruy
- Susanne Kraft
Plug your headphones in to hear the mix. This mixer does not go to the speakers. Output goes to the video recorders and the streaming device |
|
| Next make sure LR is Selected - Lit up Blue |
|
Choose what bank of Inputs you want to use. |
|
| "Layers A = Channels or Inputs 1-16" |
|
"Layers B = Channels or Inputs 17-24 and Yellow, Red, Blue and Green Wireless mics Audience and Crestron L and Right |
|
You can plug in mics to the Stage Snake 1-24 They will come up on the board with the same input number |
|
| Example plug a mic into 15 |
|
| Go to Layer A and push the slider up on input 15 |
|
| Also make sure the Master Fader is at 0 |
|
Press the Meters button to see all the input meters You can also see levels on |
|
| You can also see levels on the mixer meter |
|
If you want to use the Wireless Lavalier Mics They are located in the locker under the tired seating Make sure they have new batteries and turn them on |
|
| Press Layer B |
|
Lavs are channels 25-28 Turn up the fader for the channel you want to use and the Master Fader to set audio levels |
|
Last note if you want to apply Preamp or EQ Press Select on the channel you want to apply |
|
When you hit Select the PreAmp settings here Left side of the mixer |
|
EQ setting adjustments here Right side of the mixer |
|
You will see levels on the program input display as well as the |
|
Blackmagic Hyperdeck Recorders |
|
