Calculations



Calculating Velocity of air particles - 

  1. Airflow Analysis and Cooling Effect on Batteries:

    • The analysis focuses on understanding how airflow within a car's duct system affects the cooling of batteries.
    • Batteries generate heat during operation, and effective airflow is crucial for dissipating this heat to prevent overheating and maintain optimal operating conditions.
  2. Influence of Various Components:

    • Components such as mesh filters and aluminum duct walls affect airflow characteristics within the duct system.
    • Mesh filters are installed to remove particles from the airflow, but they also introduce resistance, which impedes airflow.
    • Aluminum duct walls also offer resistance to airflow, contributing to pressure drop along the duct system.
  3. Use of Ergun Equations for Mesh Filters:

    • Ergun equations are employed to estimate the resistance created by each mesh filter.
    • These equations consider both viscous and inertial resistance in porous media, allowing for a comprehensive assessment of airflow resistance caused by the mesh filters.
  4. Utilization of Swamee-Jain Equation for Duct Walls:

    • The Swamee-Jain equation is used to estimate the resistance offered by aluminum duct walls to airflow.
    • This equation accounts for the frictional losses in pipes or conduits, which are influenced by factors such as the duct material and flow velocity.
  5. Calculation of Airflow Velocity Reduction:

    • By combining the resistances from mesh filters and duct walls, the reduction in airflow velocity as it travels through the duct system is calculated.
    • Understanding this reduction in velocity is essential for assessing the efficiency of airflow in cooling the batteries and ensuring that an adequate airflow rate is maintained.
  6. Design Considerations and Engineering Applications:

    • These calculations play a crucial role in designing the duct system to ensure sufficient airflow for battery cooling.
    • Engineers consider factors such as energy efficiency and airflow distribution to optimize the design and ensure effective cooling while minimizing energy consumption and maximizing battery lifespan.


Batteries Cooling: 

Newton's Law of Cooling: This equation describes the rate of heat transfer between a surface and a fluid (air in this case) due to convection.

Q = hA(Ts​-T​)

  • Q is the heat transfer rate (W or Btu/hr),
  • h is the convective heat transfer coefficient (W/m²·K or Btu/hr·ft²·°F),
  • A is the surface area of the object (m² or ft²),
  • Ts is the surface temperature (°C or °F),
  • T is the fluid (air) temperature (°C or °F).
  1. Heat Transfer Rate with Velocity: When considering airflow velocity, we need to account for the increased convective heat transfer resulting from higher airflow speeds. This can be accomplished by incorporating the velocity term into the convective heat transfer coefficient (h).

  2. Modified Convective Heat Transfer Coefficient: The convective heat transfer coefficient (h) can be modified to include the effect of airflow velocity using empirical correlations or experimental data. For forced convection (where airflow is generated by a fan), the convective heat transfer coefficient can be expressed as:

    h = hnatural + K V

    Where:

    • hnatural is the natural convection heat transfer coefficient,
    • K and m are empirical constants,
    • V is the airflow velocity.
    • Modified Newton's Law of Cooling:

      Substituting the modified convective heat transfer coefficient into Newton's Law of Cooling, the heat transfer rate becomes:

      Q = hnatural + K  Vm⋅ A(Ts​-T​)

      This equation accounts for the influence of airflow velocity on the convective heat transfer coefficient and subsequently on the heat transfer rate.

  3. Evaluation with Velocity Value: After calculating the heat transfer rate (Q) using the modified equation, you can evaluate whether the airflow velocity obtained from previous calculations (V) is sufficient to maintain the battery temperature within the desired range. If the calculated heat transfer rate effectively dissipates the heat generated by the batteries, it indicates efficient cooling, and the batteries can operate safely and efficiently.

By incorporating the airflow velocity into the convective heat transfer analysis, you can assess the impact of airflow speed on battery cooling and determine the effectiveness of the cooling system in maintaining the desired temperature range. Adjustments to airflow velocity or other parameters may be necessary to achieve optimal battery cooling performance.