This guide is following the setup for the generic camera we copped off Amazon (link: https://www.amazon.com/dp/B0BWQ7KQDM)

The actual manual is relatively jank and we have lost some parts so guide will serve as a mediocre replacement.

Parts

The following will be needed to set the camera up:

• DC Power Supply and Alligator Clips as needed (near/on the shelf)

• Associated Display

• Yellow Component Cable

• Associated Camera

• DC Barrel Jack Cable

Assembly

This diagram summarizes how it should be connected.

The best operating voltage is 12 V for both the camera and display. It will work at a minimum of 7 V though.