Touch Screen Calibration

Calibrating the KCP Touch Screen  

In case the touch screen on the SmartPad is off, the following are instructions on how to recalibrate the KRC4 KCP (KUKA SmartPad).

You'll need a USB keyboard to accomplish this.  

Step 1 - Plug in the USB Keyboard

Open the cover on the back of the KCP to expose the USB ports.

Plug the USB Keyboard into the port

Step 2 - Turn the Mode Selection Key

Turn the key at the top of the KCP to bring up the mode selection screen

Step 3 - Press the Menu Button

Press the physical menu button at the bottom right of the screen.

Step 4 - Start the Calibration

Press the "Display" option, followed by "Calibrate" to begin the calibration process.

Step 5 - Calibrate the Screen

Follow the on screen instructions in order to conduct the screen calibration. There is a stylus in the handle of the KCP if needed. Once complete, it will prompt you to use the keyboard in order to save or discard the new calibration.

Step 6 - Close the Menu

Once you are done, return the selection key (shown in step 2) to its original position.