/
Reset Mobile TV Switcher from Default Power-Off State
Reset Mobile TV Switcher from Default Power-Off State
Power cycling the TV switcher rack takes several minutes. If you have to move or power cycle the rolling TV switcher from BMC2.106BA, reset the following:
AJA Ki Pro
- In the Ki-Pro, click Config > Menu 2.1 Video Input = HDMI
- In the Ki-Pro, click Config > Menu 2.2 Audio Input = HDMI
- In the Ki-Pro, click Media > Menu 14.1 Record Type = set recording quality desired
Codec | Bitrate | Hours @ 250GB Harddrive |
---|---|---|
ProRes 422 HQ | 220Mb/s | 2 Hours |
ProRes 422 | 140Mb/s | 2-3/4 hours |
ProRes 422 LT | 100Mb/s | 4-1/4 hours |
ProRes 422 PX | 45Mb/s | 9 hours |
Aja FS2
These settings should stay set during a power outage. However, if they need to be reset, these are the settings.
This device serves 3 purposes:
- PGM Audio embedder - combines Switcher PGM SDI via Input 1A with analog audio from Beringer rack mixer to output on HDMI
- Down Convert Embedded Program to SDI (FS2 output 2B feeds Composite Video to jackpanel)
- HDMI Aux in converter to HDSDI - jackpanel HDMI in comes in to Switcher input 12 via FS2 SDI output 1A
FS2 Connection | Function | Cable # |
---|---|---|
SDI In 1A | SXR PGM Out | DV8043 |
SDI In 2B | none | none |
HDMI In | Convert Jackpanel Aux HDMI In to SDI Switcher Input 12 | DV8202 |
SDI Out 1A | Converted Jackpanel Aux HDMI In to SDI Switcher Input 12 | DV8012 |
SDI Out 2B | Embedded HDSDI PGM video on Jackpanel | DV8221 |
HDMI | Embedded HDMI PGM to HDMI 1x4 DA to recording Devices | DV8223 |
FS2 Menu settings should be:
- SDI1 Out = Processor1
- SDI2 Out = Processor2
- HDMI Output = Processor2
- Input 1 = HDMI
- Input 2 = SDI1
- HDMI Audio Out = Ch1-8
- AES-EBU = Processor1
- Analog Audio Out = Ch1-8
- Audio1 (button) embedded audio out = off
- Audio1 (button) audio input = analog
- Audio2 (button) embedded audio out = on
- Audio2 (button) audio input = analog
, multiple selections available,
Related content
CMB 4.130 TV Production Control Room - Changing the studio being controlled by the TV Switcher via Video Router Salvo
CMB 4.130 TV Production Control Room - Changing the studio being controlled by the TV Switcher via Video Router Salvo
More like this
Ross Crossover Switcher – How to set the “Still Store Media” key type
Ross Crossover Switcher – How to set the “Still Store Media” key type
More like this
Ross Crossover Switcher - How to Reset the Switcher
Ross Crossover Switcher - How to Reset the Switcher
More like this
DMC 3.206 Amplifier - Amp Power Outage - How to Turn on Power Sequencers
DMC 3.206 Amplifier - Amp Power Outage - How to Turn on Power Sequencers
More like this