ProTools - How to Connect the IPAD and the S3 Console to your ProTools Computer
Turn on the S3 and the IPad Dock might be powered off Power switch is at the back of the unit | |
Turn on the S3 and the IPad Dock might be powered off Power switch is at the back of the unit | |
If the Wi-Fi of the computer is already ON, turn the Wi-Fi OFF | |
Turn the computer Wi-Fi ON | |
Go to the WiFi Icon and choose > Create Network | |
The default settings (for the Network Name and Channel ID) are fine. Click "Create" | |
Confirm that you are connected to the network that you just created | |
Put your iPad on the ProTools Dock or use the one that is already there. TURN IT ON OR -Wake it up by pressing the "Home" key For more information about using the Dock please refer to the manual: ProTools Dock (for Apple iPad) You can also view a YouTube video which walks you through the functionality of the Dock and the App: | |
Go to Settings | |
Enable Wi-Fi | |
Choose the WI-FI network for the Device you just created. | |
Choose to "Join Anyway" | |
On the iPad, open the PT Control Application If you don't have the app installed download it from here | |
This Step will setup the S3 ConsoleOn the computer, launch the EuControl application. Applications>Euphonix>EuControl Please be patient while launching - it may take a couple of minutes for the application to launch properly. | |
Once the application is running, go to > Window > EuControl Settings | |
The Surfaces Tab should list 3 devices: AVID S3 PT Dock Your iPad PT Control App It should look similar to the picture on the right. | |
The Workstations Tab should list the computer that is connected |
Welcome to the University Wiki Service! Please use your IID (yourEID@eid.utexas.edu) when prompted for your email address during login or click here to enter your EID. If you are experiencing any issues loading content on pages, please try these steps to clear your browser cache. If you require further assistance, please email wikihelp@utexas.edu.